Nine Questions every client should ask before picking Mold Maker partner
When you’re getting ready to begin the injection molding process, the first choice you make—and one of the most crucial decisions—is which plastic mold manufacturing partner you’ll select. The partner you choose should, of course, deliver on all your mold requirements—but they should also prototype your part, help you with part design adjustments, warranty their […]
Mold Trial Production Operational Manual
Load the mold and: As per the material’s property and the mold tool size to choose the appropriate mold temperature controller to heat up the needed mold temperature. We need to check again all the movements of the mold after the mold temperature is up. If cycle time is too short, ejector pins will break […]
IBM vs ISBM
Bottle-shaped containers are molded by 3 processes: EBM (extrusion blow molding), IBM (injection blow molding) and ISBM (injection stretch blow molding). EBM is the oldest and least sophisticated of these processes. The following is a list of benefits and problems associated with ISBM and IBM produced bottles. Many users mix up Injection Stretch Blow Molding […]
Increasing Mold Life in 8 ways
COPAR always believes that tool life (mold) is the key to a company’s bottom line and profitability. With the design and building stages complete, it is time to set the mold in the press and develop a process. Here are key press settings and essential preventative maintenance steps to improve mold life. 1- Tonnage Verify […]
In Mold Closing System “IMC”
In Mold Closing systems are used to automatically assemble molded parts prior to ejection from the molding surface. These systems operate during the opening time of the mold to minimize the impact on cycle time. Copar uses proprietary, proven IMC designs to integrate the closing rack and maximize mold cavitation. The closing arms provide precise movement […]
K2022.. MEET US IN DUSSELDORF –GERMANY FROM 19 TILL 16 OCTOBER AT HALL 1 – A91
